ZN85-40.5 Indoor Vacuum Circuit Breaker

ZN85-40.5 indoor high-voltage vacuum circuit breaker is an indoor high-voltage switchgear with a rated voltage of 35kV and three-phase AC 50Hz. It is suitable for control or protection switches in power plants, substations, industrial and mining enterprises and other transmission and distribution systems, especially for breaking important loads and frequent operations in high-altitude areas.
Email to Us

Overview


ZN85-40.5 indoor high-voltage vacuum circuit breaker is an indoor high-voltage switchgear with a rated voltage of 35kV and three-phase AC 50Hz. It is suitable for control or protection switches in power plants, substations, industrial and mining enterprises and other transmission and distribution systems, especially for breaking important loads and frequent operations in high-altitude areas.

 

Operating Conditions


1. Altitude: 1000m and below;

2.  Environmental temperature: upper limit+40 ℃, lower limit -25 ℃;

3.  Relative  humidity: daily average  relative  humidity  not exceeding 95%,  monthly average  relative  humidity  not exceeding 90%.

4. Seismic intensity not exceeding 8 degrees;

5. A place free from flammable, explosive, or chemically corrosive substances and intense vibrations.

 

Model and meaning


 

Technical Data


Item Unit Parameter
Rated voltage kV 40.5
Rated current A 1250 1600 2000,2500
Rated short-circuit breaking current kA 25 31.5 25 31.5
Rated peak withstand current 63 80 63 80
Rated short-time withstand current 25 31.5 25 31.5
Rated short-circuit closing current 63 80 63 80
Rated short-circuit current breaking Times Times 20
Rated operating sequence / O-0.3s-CO-180s-CO
Rated insulation level 1min power frequency withstand voltage kV 95
Rated lightning impulse withstand voltage (peak) 185
Mechanical life Times 10000
Rated single capacitor bank breaking current A 630
Rated back-to-back capacitor bank breaking current A 400
Rated operation voltage V AC/DC; 220/110
Open clearance between contacts mm 20±2
Overtravel V 7.5±1.5
Contact closing bounce time ms ≤3
Three-phase, switching synchronism ms ≤2
The main galvanic circle resistance μΩ ≤40

 

Overall and mounting dimensions(mm)


Scroll to Top